Vtech Engineering Works

Complete in all respect with all contact parts of s.s.-304 , mounted on heavy m.s. angle frame hanger, arrangement for height adjustment, with impeller of specially designed to suit the HP of the drive, motor protected with four studs, rotor en-caged with four studs & bars, complete with motor, starter and one classifying screen of any desired mesh. G.M.P. Model : M.S. Body of the machine cladded with St. Steel Sheet
Mixing Capacity :
50 ltr Mixing capacity, with 1HP/3 Phase motor
100 ltr Mixing capacity, with 1HP/3Phase motor
200 ltr Mixing capacity, with 2HP/3 Phase motor
300 ltr Mixing capacity, with 3HP/3 Phase motor
500 ltr Mixing capacity, with 5HP/3 Phase motor

We deal in Semi Automatic Bottle Washing Machine. Owing to features like easy loading and unloading, easy installation and higher capacity, these are appreciated among our clients. Every bottle is subjected to a sequence of cleaning operations of changing duration by means of powerful jets that is in three washing stations
Output: 20 to 40 Bottle per minute (Depending upon the size of bottle) operator skill

Horizontal Filter Press Applications The range of SS Sparkler type Filters ensures precisely the right filtration characteristics for all application in Chemical, Pharmaceutical, Beverages, Distilleries & Food industries.
 
Two types of Horizontal SS Filter Press are :
Sparkler type (Standard! Normal Flow) 
Zero Hold Up type (Reverse Flow)  : The filtration process in this case is just the opposite of standard Sparkler type in terms of the direction of flow. The subject liquid to be filtered enters filtration unit from the bottom into center channel and goes to the top of each plate. This technique ensures almost 100% filtration and is capable filtering up to 1 micron size. Complete filtration of the batch without any holdup due to reverse flow of liquid and hence large saving in time & cost. 

Our ''liquid mixing-stirrer machine'' is extensively useful for mixing of liquid syrups, and paste type substances. In it, the liquids and paste type substances are mixed thoroughly by blades and so the finished product can be taken out from the bottom very easily. Further, the jacketed arrangement for heating can be provided to stirrer vessel if necessary.
Capacity 0.5 H.P.
Capacity 1 H.P.
Capacity 2 H.P.
Capacity 3 H.P.
Capacity 5 H.P.
Capacity 7.5 H.P.
Capacity 10 H.P.

The Jacketed Tank , we are manufacturing and supplying a wide gamut of Double Walled Jacketed Heating Tank (Oil or Water Heated). Our quality inspectors are involved in the fabrication purpose to make sure that only quality raw material is used. Further, our clients can avail these at industry leading prices.
Specifications :
The inner and outer jacket made from S.S. 304 quality
Sheet thickness 16 SWG fitted with S.S frame legs mounted on wheels
Wheels provided are special type, with two ball bearing for efficiently working especially rounded from circumference for easy rotation
Vessels are with removable type lid at the top
Complete with ball valve for solution removal.
The vessels are given mirror finished polish.
Complete with Electric Heater, Thermometer, Connector, Panel etc with water inlet and outlet Nozzle.
Capacity & Gauge in SWG :
100 liters & 16 SWG
200 liters & 16 SWG
300 liters & 16 SWG
500 liters & 14/16 SWG
650 liters & 14 SWG 3 Heater of 3 kw / 9 kw
750 liters & 14 SWG 3 Heater of 3 kw / 9 kw

Electric Operated : Outer body of the kettle is made from 16 swg sheet & inner vessels of the kettle is made from 14 swg sheet, oil heated fitted with electric heaters of 6 kw (3 x 2 kw each), thermostatically controlled from 50 ° C to 300 ° C, complete with tilting device, mounted on S.S stand complete, cap. 50 Ltr. Supplied without oil.

Electric Operated with Stirrer :The outer and inner wall of the vessel is made from 14 SWG SS 304. The vessel is oil / water heated with electrical heater of 6 kw. Thermostatically controlled. The unit is complete with planetary mixer mounted on S.S. channel stand. It is specially designed with slow speed beater rotating in planetary motion at 50/60 rpm fitted with reduction gearbox and 1 HP 3 Phase motor. The titling movement of the vessel is hand operated capacity 50 liters. The vessel is mounted on S.S tubler stand. Provided with inlet and outlet provision for jacket. Of oil and water. The lid is also provided (half in 2 No. or slit type with hinge lever) with S.S electrical panel fitted with digital temperature controller / indicator instead of thermostat. 

The foot operated all purpose filling machine is mounted on angle frame. The hopper fitted to this machine is of 8 l/kg capacity and the machine further consists of cylinder and nozzle all made of stainless steel-304. The base plate on which filled container rests is fabricated with stainless sheet. The machine is suitable for filling 5 ml/gm to 100ml/gm range, for all types of liquids/semi-solids, creams pests, inks in tubes, jars cans and bottles etc.

Specific features:

Filling speed: 16 to 20 tubes or containers per minute

Specification - as above - but fitted with 30ml to 100ml

Filling cylinder and hopper of 22 l capacity

Extra liquid filling nozzle 5 ml -100 ml capacity

Extra semi-solid filling nozzle for jars / tubes.

The bottle capping machines that we offer are ideal for aluminum PP caps. These support both threading and sealing through one stroke and pedal type. The height of the bottle can be adjusted with hand. It comes with SS belt guard and ¼ HP motor and is ideal for screw capping for plastic bottles.
 

This Tincture Press is for separation of Marc of herbs and extracts made by percolation / maceration / extraction of herbs & solvents by pressing method. The unit consists of double chamber. The plunger pressing plate approx. ½ " thick moves in the inside chamber with hand operated mechanical rotation pressing system. The unit is with out let valve. The whole assembly is mounted on heaving M.S. base stands with M.S. / S.S. sieve for filtration purpose.

It is Electrically Operated and foot Switch is provided to ''ON'' or ''OFF'' the machines as both the hands of the operator remain free in convenience of feeding and discharging the Labels/Cartons/Bags.

Specifications :

Printing area : 85mm x 55mm or 154mm x 55mm

Printing Speed : 25, 36 & 48 stroke per min.

Drive Motor : 0.25 H.P., 1440 R.P.M., 1 Phase

Weight : 40 kg

Accessories : Ink tube, metal stereo box

Hand operated Hand Operated Batch Printing Machine/ MRP Printing Machine  this a small printing unit and is most suitable for overprinting labels cartoons (plastic made paper made or laminated) etc. For printing details like “mfg. Date, batch no., expiry date, retail price, ingredients, logos ” etc. The unit is supplied with composing block where the printing matter is composed with printer’s types. The maximum printing area (size) of composing block is 5cm x 7cm. The unit is supplied with complete kit i. E. Printer’s type, ink etc. Output 20 to 30 impressions per minute depending on operator. This unit is useful for food, chemical, pharmaceutical, automobile parts, ready made garments, electronics and other industries.
 

Electrically heated out side dimension 56” width x 24” Depth x 50” height, with actual working dimension 33” width x 22” depth x 46” height, made of double walled mild steel/stainless steel body, heavily insulated with glass wool, total load 6 Kw with dial type thermometer and thermostat for controlling temperature, with ½ H.P.motor and one fan for circulating air able to accommodate 240 Bottles of 1 Lb. Capacity in 8 mild steel fabricated Crates of size. 19”x 15”x 9.5” deep with starter suitable for operation on AC/440V/3P/50C supply as per your requirements.
Available in two models:
Routine Model
GMP Model : M.S Body of the machine cladded with Stainless Steel sheet.